Power Devices
-
Tripp-Lite DataShield In-Line Surge Protector for Network/Phone DNET1SKU: Tripp-Lite DataShield In-Line Surge Protector for Network/PhoneUS$ 25,00Protects network datalines on workstations, printers, hubs and other devices from blown NIC cards, garbled transmissions, lock-ups and hardware failures caused by surges, line noise, ESD, faulty wiring and lightning.Meer Informatie
- Network Ethernet line surge suppression for 100Base-T, 10Base-T, Token Ring, AS400/Sys3x and RS422 applications
- Ideal protection for NICs, terminals, hubs, printers, LAN equipment, and other internetworking devices
- Protects against the effects of electrostatic discharge, faulty wiring and lightning
- Reduces blown NIC cards, garbled network transmissions, system lock-ups and hard equipment failure
- 750A circuit breaker; 7.5V nominal clamping voltage
- RJ45 input and output connections with included patch cable
Tripp Lite's DNET1 provides network Ethernet line surge suppression for 100Base-T, 10Base-T, Token Ring, AS400/Sys3x and RS422 applications. Surge suppression is handled with balanced arrays of high-speed avalanche diodes that divert excess energies created by electrostatic discharges, faulty wiring or lightning away from network interface connections. Tripp Lite network surge suppressors reduce blown NIC cards, garbled network transmissions, system lock-ups and hard equipment failure by safely shunting dataline surges to ground. Convenient RJ45 input and output connections with an included 5-inch Ethernet patch cable enables ideal protection for network workstations, printers and other internetworking devices with a network connection. For peace of mind, the DNET1 comes with a lifetime warranty and RoHS-compliant design.
Features
- DNET1 protects network workstations, printers and internetworking devices from surges present on 10/100Base-T, token ring, AS400/Sys3x or RS422 network lines
- Convenient RJ45 input and output connections make for simple installation (RJ45 input/output connections, pins 1-8, 7.5V clamping)
- 5 inch Ethernet patch cable enables ideal protection placed as close as possible to the point of use
- Surge suppression utilizing high speed avalanche diodes divert excess energies on the network to ground
- RoHS Compliance
- Lifetime Warranty
-
APC Power-Saving Back-UPS Pro 1500VA (BR1500G)SKU: APC Power-Saving Back-UPS Pro 1500VA (BR1500G)US$ 298,00
The Power-Saving Back-UPS Pro 1500 (120V) from APC provides power to your important computer components in the event of an electrical outage. The Uninterruptible Power Supply (UPS) contains a battery which continues to power computers, monitors and other components if the electricity is cut from them. An LCD status display provides information including remaining battery life, load capacity, and event notices. The battery is hot-swappable and easy to replace. An audible alarm alerts you of events like power outage and low battery.
Meer Informatie- Battery and Surge Protected Outlets
- Back up and protect your hardware and data during power outages, surges and spikes.
- DataLine Surge Protection
- Provides protection of connected equipment from power surges on the data lines.
- Surge Only Outlets
- Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
- Energy Management Function
- Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
- Boost and Trim Automatic Voltage Regulation (AVR)
- Gives higher application availability by correcting low and high voltage conditions without using the battery.
- Green Mode
- Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- Customizable Voltage-Transfer Points
- Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
- Customizable Voltage Sensitivity
- Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
- Intelligent Battery Management
- Maximizes battery performance, life, and reliability through intelligent, precision charging.
- Cold-Start Capable
- Provides temporary battery power when the utility power is out.
- Battery Failure Notification
- Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
- Automatic Self-Test
- Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Transformer-Block Spaced Outlets
- Protect equipment with input transformer blocks without blocking access to other receptacles.
- Resettable Circuit Breaker
- Easy recovery from overloads; no need to replace a fuse.
- Simple Battery Replacement
- Increases UPS availability by allowing quick, easy battery replacement.
- USB Connection
- Use your PC to access additional power protection and management features for your UPS via a USB Port.
- LCD Status Display
- Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
- Audible Alarms
- Provides notification of changing utility power and UPS power conditions
- Disconnected Battery Notification
- Warns when a battery is not available to provide backup power.
