PoE

Our Power-over-Ethernet (PoE) patch panel is a passive device used to supply power via UTP cables to terminal devices equipped with PoE ports. 10BASE-T and 100BASE-TX networks use only two of the four pairs in the twisted-pair cable, located on pins 1 plus 2 and 3 plus 6. The PoE panel injects supply voltage to the 4 plus 5 (+) and 7 plus 8 (-) pins/wires. The front panel has two rows of RJ-45 ports. The ports marked with numbers on a white background (Data) are standard Ethernet ports (inputs), those with a yellow background (Power+Data) are PoE ports for connecting terminal PoE devices (outputs).

The maximum distance range of supplying PoE devices is 328ft. The actual range depends on the number of connected devices and their power consumption. The transmission range is also limited by the distances from active devices (switches, routers etc.) to the data ports of the device. The recommended transmission medium is twisted-pair cable Cat 5e or higher. Our PoE patch panel can supply power up to 16 PoE devices.

• 1 x Gigabit LAN/1 x PoE Port
• Remote Reset Capability
• Reset Button
• Power Indicator
• 80+% Efficiency
• 65 kHz Switching Frequency
• IEC-320 C6 AC Connector

The POE-24-24W-G 24V PoE 1A Gigabit Adapter from Ubiquiti Networks has features like surge protection, clamping protection, maximum surge discharge, and peak pulse current to help protect your Ubiquiti PoE devices. It also includes an AC cable with earth ground.

ESD attacks are the leading cause for device failures. You can effectively protect against ESD attacks using this grounded PoE adapter. This PoE adapter is compatible with most Ubiquiti PoE devices, including airFiber, airMAX, airVision, UniFi, and mFi.

• 4 x Gigabit Ethernet Ports
• 4 Gb/s Non-Blocking Line Rate
• Durable Weatherproof Form Factor
• Mounts to Pole or Wall

Power up to three PoE devices with the NanoSwitch Outdoor 4-Port PoE Passthrough Switch from Ubiquiti Networks. This passthrough switch features a single RJ45 PoE input and three RJ45 PoE outputs while supporting a total non-blocking line rate of 4 Gb/s. The NanoSwitch also comes equipped with a durable weatherproof enclosure and can be mounted to a pole or wall for easy installation in nearly any environment.

4 Gigabit Ethernet Ports
The Ubiquiti Networks NanoSwitch is an unmanaged switch with four Gigabit Ethernet ports. It supports up to 4 Gb/s total non-blocking line rate.

Hardware
Featuring a durable, weatherproof form factor, the NanoSwitch is ideal for outdoor deployment. For quick installation, the compact NanoSwitch can be easily mounted on a pole or wall.