Networking

• 4 x Gigabit Ethernet Ports
• 4 Gb/s Non-Blocking Line Rate
• Durable Weatherproof Form Factor
• Mounts to Pole or Wall

Power up to three PoE devices with the NanoSwitch Outdoor 4-Port PoE Passthrough Switch from Ubiquiti Networks. This passthrough switch features a single RJ45 PoE input and three RJ45 PoE outputs while supporting a total non-blocking line rate of 4 Gb/s. The NanoSwitch also comes equipped with a durable weatherproof enclosure and can be mounted to a pole or wall for easy installation in nearly any environment.

4 Gigabit Ethernet Ports
The Ubiquiti Networks NanoSwitch is an unmanaged switch with four Gigabit Ethernet ports. It supports up to 4 Gb/s total non-blocking line rate.

Hardware
Featuring a durable, weatherproof form factor, the NanoSwitch is ideal for outdoor deployment. For quick installation, the compact NanoSwitch can be easily mounted on a pole or wall.

Vented utility shelves - Feature a vented surface that provides airflow to critical equipment in order to avoid overheating.

Solid utility shelves - The perfect solution for heavy-duty equipment. Solid shelves can support up to 50% more weight than vented shelves.

These standard 19-inch steel racks are designed for the mounting of equipment for cable installations, especially where easy access to cables is necessary. These racks provide more space to accommodate networking equipment and offer improved cable management.

Upgrade the data paths of your local wired network to information superhighways with Gigabit switches at the desktop. Accelerate your performance and productivity when you send large files to network servers, drives, and printers at Gigabit speed. Power over Ethernet (PoE+) capability also carries electrical power to peripheral devices without the need for additional outlets.

• 8-port switch with 4 PoE+ ports (first 1-4 ports) and dedicated PoE power budget of 50 W
• Bandwidth: 16 Gbps (non-blocking)
• Mounting: Wall mount
• Gigabit Performance
• Power-Saving: Cable connected detection Sleep mode
• Full line rate and forwarding rate of 64B frame at: 1.488 Mpps for 1000M port, 0.1488 Mpps for 100M port, 0.01488 Mpps for 10M port
• Minimum System Requirements: Connected devices need Ethernet connectivity and Ethernet cables

• Sixteen 10/100Mbps auto-negotiation RJ-45 Ports
• All ports support auto-negotiation functions to intelligently detect and determine optimum speed and mode
• High performance connectivity and reliable data transfer, specially designed for small and medium sized networks
• Full wire speed store-and-forward technology instantly eliminates bad packets
• Complies with IEEE802.3 10Base-T ethernet, IEEE802.3u 100Base-TX fast ethernet standards
• 16 RJ-45 ports operating at 10/100Mbps, supporting 802.3 NWAY auto-negotiation, duplex mode and flow control
• Support IEEE802.3x flow control for full-duplex, and backpressure flow control for half-duplex
• Each RJ-45 port supports auto-MDI/MDIX selection for easy integration into a network
• Features store- and- forward switching method
• Supports MAC address auto-learning and auto-aging functions
• 4000 MAC address table
• Easy-to-understand lEDs display real-time traffic status to monitor and diagnose the network
• Built-in power supply for 100-240 volts for worldswide compatibility
• Standard 19-inch rack-mount case

The SE3008 8-Port Gigabit Ethernet Switch from Linksys features 8 Gigabit Ethernet ports allowing you to add additional reliable data ports to your existing network. This switch supports a variety of network standards including IEEE802.3, 802.3u, 802.3x, 802.3ab, and 802.3az for enhanced network connectivity and security. Once configured, you can monitor the status of the switch through integrated LED lights displaying the status of the power to the router and the network status.

• 8 Gigabit Ethernet ports
• Gigabit Ethernet 10x faster than Fast Ethernet
• Power saving features
• Plug and play
• Power Input: 100-240V AC, 50-60Hz 

Nexxt Solutions horizontal cable management is designed to mount to any standard 19” EIA rack or cabinet. Fingers have smooth edges and are widely spaced to give additional cable support, also allowing terminated wires to be installed, removed or rerouted easily. Its innovative cover provides full access to cables, while improving the appearance of panels by keeping small and large bundles of cords neatly organized.

Model: AW220NXT07

The category 5E Patch Panel is designed for high-density installations and exceeds ANSI/TIA/EIA-568 C.2 standards, accepts 22-26 AWG wires, and features phosphor bronze contacts. Patch panels are 19” horizontal rack mount compatible and are offered in 24, and 48 port configurations with built-in anchoring points for improved cable organization and security. Features color coded ports for universal wiring connections. A 110-type termination provides the most secure and reliable connection to maximize performance. Certified for safety by Underwriters Laboratories.